DrizAir 1200 Dehumidifier Manual: An Overview
This manual provides essential guidance for the DrizAir 1200 (Model F203-A) dehumidifier, detailing safe operation, maintenance, and troubleshooting procedures for optimal performance.
The DrizAir 1200 is a powerful refrigerant dehumidifier designed to effectively reduce humidity within enclosed structural environments. Manufactured by DRI-EAZ PRODUCTS, INC., located at 15180 Josh Wilson Road, Burlington, WA 98233, this unit is a cornerstone for professional water damage restoration and humidity control.
This dehumidifier is engineered to prevent damage to materials caused by excess moisture. Its robust construction and efficient operation make it suitable for a variety of applications, from residential properties to commercial buildings. Proper use, as outlined in this manual, ensures longevity and peak performance. Remember to register your purchase at warranty.drieaz.com for enhanced support.
Model Number and Identification (F203-A)
This dehumidifier is specifically identified as the DrizAir 1200, with the model number F203-A. This designation is crucial for ordering replacement parts, accessing specific documentation, and ensuring compatibility with accessories. Locate this model number on the unit’s data plate, typically found on the rear or side panel.
Accurate identification is vital when contacting DRI-EAZ PRODUCTS, INC. for support – either via phone (800-932-3030) or fax (360-757-7950). Referencing the F203-A model number streamlines the assistance process. When sourcing parts from Dri-Eaz Products by Legend Brands, always verify compatibility using this identifier.
Safety Precautions
Always operate the DrizAir 1200 in a vertical position, and ensure it’s plugged into a grounded 15-amp circuit to prevent electrical hazards and damage.
Important Safety Instructions
Read and understand all instructions before operating the DrizAir 1200 dehumidifier. This appliance is designed for enclosed structural environments and requires careful handling. Always ensure the unit is positioned on a stable, level surface. Never operate with a damaged cord or plug, and avoid using extension cords.
Disconnect the unit from the power source before performing any maintenance or cleaning. Do not insert any objects through the vents. This dehumidifier contains refrigerant; servicing should only be performed by qualified personnel.
Warning: To reduce the risk of fire or electric shock, do not use this dehumidifier in the vicinity of flammable liquids or gases. Keep the unit away from water sources and ensure proper ventilation. Failure to follow these instructions could result in injury or property damage.
Operating Position – Vertical Use Only
The DrizAir 1200 dehumidifier must be operated in a vertical (upright) position at all times. Horizontal operation can cause significant damage to the compressor, leading to reduced performance and potential failure. If the unit has been transported horizontally, allow a minimum of 30 minutes for the compressor oil to return to its reservoir before powering on.
During transport, secure the unit to prevent tipping or rolling. Laying the unit on its side allows the compressor oil to flow into the refrigerant coils, diminishing the dehumidifier’s ability to function effectively.
Important: Operating the unit in any position other than vertical voids the warranty and may create a safety hazard.
Power Supply Requirements (15 Amp Grounded Circuit)
The DrizAir 1200 dehumidifier requires a dedicated 15-amp grounded electrical circuit. Do not use extension cords or adapters, as they can create a safety hazard and may damage the unit. Ensure the outlet is properly grounded to prevent electrical shock.
Connecting to an overloaded circuit or one with insufficient amperage can cause the circuit breaker to trip or a fuse to blow. Verify the voltage matches the unit’s specifications before plugging it in.
Caution: Improper electrical connection voids the warranty and poses a serious risk of fire or electric shock. Always consult a qualified electrician if you are unsure about your electrical system.
Dehumidifier Components & Features
The DrizAir 1200 features a user-friendly front panel and control panel, including a display and four keys for intuitive operation and monitoring.
Front Panel Overview
The front panel of the DrizAir 1200 dehumidifier is designed for easy access and visual inspection. FIG. A, as referenced in the manual, illustrates the layout of key components on the front of the unit. Notably, the handle for the model 1200 is not pre-attached and requires installation using four screws with washers.
This panel provides a clear view of the air intake, allowing for monitoring of filter condition. The overall construction is robust, intended for use in structural environments where humidity control is critical. The panel’s design facilitates straightforward maintenance procedures, such as filter replacement and coil inspection, contributing to the longevity and efficient operation of the dehumidifier.
Control Panel – Display and Keys
The DrizAir 1200 dehumidifier features a user-friendly control panel equipped with a clear display and four intuitive keys. This interface allows for precise control over dehumidification settings and monitoring of operational status. The display provides crucial information regarding humidity levels and operational modes.
The four keys enable users to power the unit on/off, adjust desired humidity levels, control fan speed, and initiate any specialized functions. The panel’s design prioritizes ease of use, even in challenging work environments. Proper understanding of these controls is essential for maximizing the dehumidifier’s efficiency and achieving optimal moisture removal.
Operation Instructions
Proper operation involves initial setup, allowing oil to return after transport, and understanding the start/stop procedures for the DrizAir 1200 dehumidifier.
Initial Setup Before Operation
Before initiating operation of your DrizAir 1200 dehumidifier, ensure proper setup for optimal performance and longevity. Carefully inspect the unit for any visible damage incurred during shipping. Verify that the unit is placed on a stable, level surface to prevent operational issues and potential hazards.
Crucially, if the DrizAir 1200 has been transported in a horizontal position, allow it to stand upright for a minimum of 30 minutes. This waiting period is essential to allow the compressor oil to return to its reservoir, preventing potential damage to the compressor and ensuring efficient dehumidification. Failure to adhere to this guideline may compromise the unit’s functionality.
Connect the dehumidifier to a dedicated 15-amp grounded circuit. Ensure the power cord is securely plugged into the outlet. Finally, attach a suitable drainage hose to the designated outlet if continuous drainage is desired.
Allowing 30 Minutes for Oil Return After Horizontal Transport
A critical step after transporting your DrizAir 1200 dehumidifier horizontally is allowing sufficient time for the compressor oil to return to its reservoir. During horizontal movement, the oil can migrate from the compressor and into the refrigerant coils, reducing the unit’s efficiency and potentially causing compressor damage.
Before powering on the unit, ensure it remains in a vertical position for at least 30 minutes. This allows gravity to draw the oil back down into the compressor, ensuring proper lubrication and optimal operational capacity.
Ignoring this precaution can lead to reduced dehumidification performance and potentially void the warranty. Prioritizing this simple step safeguards your investment and guarantees the longevity of your DrizAir 1200 dehumidifier.
Starting and Stopping the Dehumidifier
To initiate operation, ensure the DrizAir 1200 is positioned vertically and connected to a properly grounded 15-amp circuit. The unit features a user-friendly control panel with intuitive keys for power and function selection. Simply press the power button to activate the dehumidifier.
The display will illuminate, indicating the unit is running. Monitor the humidity levels and adjust settings as needed. To cease operation, press the power button again. The unit will undergo a brief shutdown sequence before completely powering off.
Avoid frequent cycling of the unit; allow it to run for a sufficient duration to achieve desired humidity levels.
Maintenance and Care
Regular filter and coil cleaning are crucial for maintaining peak performance and extending the lifespan of your DrizAir 1200 dehumidifier.
Filter Cleaning
Maintaining a clean filter is vital for efficient dehumidification. The DrizAir 1200’s filter should be inspected regularly and cleaned as needed, depending on the operating environment. A dirty filter restricts airflow, reducing the unit’s capacity and potentially causing it to overheat.
To clean the filter, simply remove it from the dehumidifier. You can then vacuum the filter to remove loose dust and debris. For a more thorough cleaning, wash the filter with mild soap and warm water. Rinse thoroughly and allow the filter to dry completely before reinstalling it in the unit. Never operate the dehumidifier without a filter installed.
Regular filter maintenance ensures optimal performance and prolongs the life of your DrizAir 1200 dehumidifier.
Coil Cleaning
Maintaining clean coils is crucial for the DrizAir 1200’s performance. Over time, dust and debris can accumulate on the evaporator and condenser coils, hindering heat transfer and reducing dehumidification efficiency. Regular coil cleaning ensures optimal operation and prevents potential damage.
To clean the coils, first disconnect the dehumidifier from the power supply. Access the coils (refer to the parts diagram for location). Use a soft brush attachment on a vacuum cleaner to gently remove loose dust. For stubborn dirt, a commercially available coil cleaner can be used, following the manufacturer’s instructions carefully;
Ensure the unit is completely dry before reconnecting and resuming operation.
Troubleshooting
This section details common issues with the DrizAir 1200, offering solutions for problems like compressor oil concerns and general operational difficulties for quick fixes.
Common Issues and Solutions
Problem: The DrizAir 1200 isn’t removing sufficient moisture. Solution: Ensure the unit is positioned correctly – vertically only – and the air inlet/outlet aren’t obstructed. Check the air filter for dirt and clean or replace it as needed. Verify the hose is properly connected and not kinked.
Problem: Dehumidifier is noisy during operation. Solution: Confirm the unit is on a level surface. Excessive noise could indicate internal component issues; contact DRI-EAZ support.
Problem: Unit shuts off unexpectedly. Solution: Check the power supply – a 15 Amp grounded circuit is required. Ensure the collection tank isn’t full, or the drain hose isn’t clogged. A full tank will trigger an automatic shut-off.
Problem: Ice forming on the coils. Solution: This can occur in low-temperature environments. Allow the unit to thaw, and ensure adequate ventilation.
Addressing Compressor Oil Issues
Critical Note: The compressor contains oil essential for operation. Improper handling can cause damage. Issue: If the DrizAir 1200 has been transported horizontally, do not operate it immediately.
Solution: Allow the unit to stand vertically for a minimum of 30 minutes. This allows the compressor oil to return to the oil reservoir. Operating the unit prematurely can lead to compressor failure, voiding the warranty.
Warning: Do not attempt to manually add or drain compressor oil. This requires specialized training and equipment. Contact DRI-EAZ Products, Inc. for qualified service. Ignoring this precaution can cause severe damage.
Further Assistance: If you suspect a compressor oil issue beyond horizontal transport, contact DRI-EAZ support immediately for diagnosis and repair options.
Warranty Information
Register your DrizAir 1200 at warranty.drieaz.com to ensure prompt assistance and benefit from the full warranty coverage offered by DRI-EAZ PRODUCTS, INC.
Registering Your Purchase (warranty.drieaz.com)
Promptly registering your new DrizAir 1200 dehumidifier at warranty.drieaz.com is crucial for a streamlined warranty experience. This registration process allows DRI-EAZ PRODUCTS, INC. to efficiently provide support, address any potential issues, and ensure you receive the benefits associated with your purchase.
The registration process is simple and requires basic information about your dehumidifier and yourself. By registering, you enable DRI-EAZ to quickly access your purchase details should you require assistance with operation, maintenance, or warranty claims.
Don’t delay – visit warranty.drieaz.com today to secure your DrizAir 1200’s warranty and enjoy peace of mind knowing you’re covered!
Contact Information (DRI-EAZ PRODUCTS, INC. – Phone & Fax)
For any questions, concerns, or support regarding your DrizAir 1200 dehumidifier, please don’t hesitate to contact DRI-EAZ PRODUCTS, INC. directly. Our dedicated team is available to assist you with troubleshooting, warranty inquiries, or locating replacement parts.
You can reach us via phone at 800-932-3030 for immediate assistance during business hours. Alternatively, you can send a fax to 360-757-7950. We are committed to providing excellent customer service and ensuring your satisfaction with your DrizAir 1200.
Visit our website at www.dri-eaz.com for additional resources, FAQs, and detailed product information. We value your business and look forward to assisting you!
Parts and Diagrams
Detailed parts lists and diagrams for the DrizAir 1200 are readily available, facilitating repairs and ensuring you locate the correct replacement components quickly.
Accessing Parts Diagrams
Locating the correct parts diagrams for your DrizAir 1200 dehumidifier is straightforward. Dri-Eaz Products, Inc. provides comprehensive resources online to assist with identifying components and understanding the unit’s assembly.
Visit the Dri-Eaz website – www.dri-eaz.com – and navigate to the support or parts section. You can typically search by model number (F203-A) to find exploded views and detailed schematics. These diagrams clearly illustrate each part’s location and its relationship to other components within the dehumidifier.
These diagrams are invaluable for maintenance, repairs, and understanding the internal workings of your DrizAir 1200. They help ensure you order the correct replacement parts and can confidently tackle repairs, extending the life of your dehumidifier.
Locating Replacement Parts
Securing genuine replacement parts for your DrizAir 1200 dehumidifier (Model F203-A) is crucial for maintaining its performance and longevity. Dri-Eaz Products, Inc. offers a wide catalog of parts, many available for same-day shipping.
The Dri-Eaz website, www.dri-eaz.com, is the primary source for locating and purchasing replacement components. Utilize the parts finder tool, often searchable by model number, to identify the specific part you require. Alternatively, you can contact Dri-Eaz directly via phone (800-932-3030) or fax (360-757-7950) for assistance.
Always use authentic Dri-Eaz parts to ensure compatibility and avoid compromising the dehumidifier’s functionality. Using non-approved parts may void your warranty and potentially damage the unit.